Omron OMRON E2E-X1R5E1 2M Standard Proximity Sensor Shielded (M8 Sensing Distance 1.5mm)(DC 3 Wire Model)(Pre Wired Models)(PVC(Oil Resistant))(Operation Mode NO) NN

[Sensing head size] M8 [Type] Cylinder type Shielded [Sensing distance] 1.5 mm +/-10% [Setting distance] 0 to 1.2 mm [Differential distance] 10% max. of sensing distance [Sensing object] Ferrous metal (Sensitivity lowers with non-ferrous metals.) [Standard sensing object] Iron 8 x 8 x 1 mm [Response frequency] 2 kHz (Average value) [Power source] DC Three-wires models [Power supply voltage] 12 to 24 VDC (ripple(p-p) 10% max.) [Operating voltage range] 10 to 30 VDC [Current consumption] 13 mA max. [Control output (Output type)] NPN collector load built-in output [Control output (Switching capacity)] 200 mA [Control output (Residual voltage)] 2 V (Load current 200 mA with cable length of 2 m) [Indicator] Operation indicator (red) [Operation mode] NO [Protective circuit] Output short-cut protection, Reverse polarity protection, Surge suppressor [Voltage influence] +/-1% max. of sensing distance in rated voltage range +/-15%. (As the basis for sensing distance at standard power voltage) [Insulation resistance] Between charged parts and the case: 50 M Ohm min. at 500 VDC [Dielectric strength] Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min [Vibration resistance] 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h [Shock resistance] 500 m/s**2 for 10 times each in X, Y, and Z directions [Degree of protection] IEC: IP67 Company standard: Oil-proof [Connection method] Pre-wired models(Cable length: 2 m) [Weight (Packed state)] approx. 65 g [Material] Case: Stainless steel (SUS303) Sensing surface: Polybutylene terephthalate (PBT) Clamping nuts: Brass nickel plating Toothed washer: Iron zinc plating [Accessories] Instruction manual (1)