Brixwell Brixwell Square Tubing Back-to-Back Pull Handle, Brass, 8" CTC, For 1/4" to 1/2" Glazing Thickness, Brushed Nickel Finish

The Brixwell Square Tubing Back-to-Back Pull Handle is designed for glass doors where a handle is needed on both sides of the panel. It is made from brass and features a brushed nickel finish with a square tubular profile that pairs well with square cornered hinges and modern glass hardware layouts. This shower handle uses a back-to-back mounting style, placing one handle on each side of the glass. It is intended for sliding, folding, swing side, and floor pivot doors. The square tube profile uses a 3/4" tube size and provides a comfortable hand grip without adding excess bulk to the glass surface. The handle has a center to center spacing of 8" and an overall length of 8-3/4". It projects 2-1/2" from the glass surface, providing adequate hand clearance during daily use. Installation requires a 1/2" hole diameter and supports glass thickness from 1/4" to 1/2" (6mm to 12mm). This square pull handle is designed for glass mount back-to-back installation and requires monolithic tempered glass. Plastic washers and nylon spacers are included to separate metal parts from the glass surface during mounting. This handle is commonly used as a glass door pull for shower enclosures and bathroom doors. Care Instructions: Wipe hardware dry after use. Clean with mild soap and water if needed. Avoid abrasive cleaners. Installation Steps - 1) Drill two 1/2" holes in the glass (glass thickness 1/4" to 1/2"). 2) Insert spacers and fixed core heads through the glass holes. 3) Align both pull handles on opposite sides of the glass. 4) Tighten set screws evenly to secure the handles in place. Note: Glass must be drilled/fabricated prior to tempering. Do not drill, cut, or modify tempered glass.