Unknown Tazz™

A classic Estes kit re-imagined.

The specially designed engine mount has two molded tabs. These tabs hold the wing elevators in the flat position during boost for nice straight-up flights. Then at apogee, the ejection charge kicks the engine mount out and “snap”, the two elevators move into the full “up” position and TAZZ Estes rocket spins wildly on the way down!

Larger than the 1960's "Gyroc" kit, this rocket model has balsa wings with alignment tabs that fit into pre-cut slots. This makes aligning the wings much easier during assembly and after the glue is dry. Moreover, you also get a strong wing-to-tube glue joint.

The clever molded plastic retainers make installing and replacing the elevator actuator rubber bands very easy.

You can’t count the number of spins this Tazz Estes rocket will make on the way down. What you can do is counting on it for lots of fun flights!

A classic Estes kit re-imagined, featuring:

• Specially designed engine mount with two molded tabs that hold the wing elevators in the flat position during boost for nice straight-up flights, and then move them into the full "up" position at apogee for wild spins on the way down
• Balsa wings with alignment tabs that fit into pre-cut slots, making aligning the wings much easier during assembly and after the glue is dry, and providing a strong wing-to-tube glue joint
• Clever molded plastic retainers that make installing and replacing the elevator actuator rubber bands very easy
• Lots of fun flights with countless spins on the way down

• With balsa wings featuring alignment tabs that fit seamlessly into pre-cut slots, assembling the wings of the Tazz Estes rocket is a breeze. These tabs ensure precise alignment during assembly and after the glue dries, resulting in a strong wing-to-tube glue joint. Additionally, the molded plastic retainers simplify the installation and replacement of the elevator actuator rubber bands.

  
  

  Larger than the 1960s "Gyroc" kit, this re-imagined classic includes balsa wings with alignment tabs that fit perfectly into pre-cut slots, simplifying wing alignment during assembly and ensuring a strong glue joint after drying.

  
  

  The clever molded plastic retainers make it easy to install and replace the elevator actuator rubber bands, ensuring your Tazz Estes rocket is always ready for its next adventure.

  Countless spins and endless fun await with the Tazz Estes rocket—a classic kit re-imagined for today's rocket enthusiasts!

  
  

• • Get ready to watch the Tazz Estes rocket spin wildly on its descent, with countless spins to count, making every flight an exhilarating experience. This classic Estes kit has been re-imagined for endless fun flights!
  
  
  • The specially designed engine mount features two molded tabs that hold the wing elevators in a flat position during boost, ensuring straight-up flights. At apogee, the ejection charge releases the engine mount, causing the elevators to snap into the full “up” position, sending the Tazz Estes rocket into a thrilling spin on its way down.

  
  

• RECOMMENDED ENGINES: A8-3, B6-2, B6-4, C5-3, C6-3
• PROJECTED ALTITUDE: 700 ft. (213 m) on a C6-3